Bộ phát Wifi UniFi Swiss Army Knife (UK-Ultra)

2.965.000 

Thông số kỹ thuật

Bộ phát Wifi UniFi Swiss Army Knife (UK-Ultra)

Mechanical
Dimensions 137 x 84 x 34 mm (5.4 x 3.3 x 1.3″)
Weight 173 g (6.1 oz)
Enclosure materials UV-stabilized polycarbonate
Mount materials Polycarbonate, SGCC steel, plastic
Pole mount diameter 1~2″ on pipe outer diameter
Wind survivability 33.2 N at 200 km/h (7.5 lbf at 125 mph)
Weatherproofing IPX6
Hardware
Networking interface (1) GbE RJ45 port
Management interface Ethernet
Power method PoE
Power supply UniFi PoE Switch
Supported voltage range 44—57V DC
Max. power consumption 8W
Max. TX power
2.4 GHz 20 dBm
5 GHz 20 dBm
MIMO
2.4 GHz 2 x 2
5 GHz 2 x 2
Throughput rate
2.4 GHz 300 Mbps
5 GHz 866.7 Mbps
Antenna gain
2.4 GHz 6 dBi
5 GHz 6 dBi
Antenna (1) Internal antenna
(2) RP-SMA connectors for optional external antennas
LEDs (1) Power: white/blue
(4) Mesh signal: blue
Button Factory reset
Mounting Wall, ceiling, pole mount (Included)
Operating temperature -40 to 60° C (-40 to 140° F)
Operating humidity 5 to 95% noncondensing
Certifications CE, FCC, IC
Software
WiFi standards 802.11a/b/g/n/ac
Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID 8 per radio
VLAN 802.1Q
Advanced QoS Per-user rate limiting
Guest traffic isolation Supported
Concurrent clients 200+
Supported Data Rates
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 300 Mbps (MCS0 – MCS15, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 866.7 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)
Application Requirements
UniFi Network Web: Version 8.0.7 and later
iOS™: Version 10.11.1 and later
Android™: Version 10.10.1 and later
KHUYẾN MÃI
  • Miễn phí giao hàng trực tiếp, hướng dẫn sử dụng trong nội thành Hà Nội
  • Miễn phí cài đặt với hóa đơn trên 5 triệu trong nội thành Hà Nội
  • Miễn phí hướng dẫn sử dụng, cài đặt từ xa cho khách hàng ở xa
  • Miễn phí giao hàng Freeship toàn quốc